| |
 |
Oil Water Separators |
 |
 |
|
 |
The PURO is designed to separate oil from condensate, that is extracted from compressed air systems. The PURO condensate separator covers compressor capacities up to 8m 3 /min (300 cfm). Polypropylene attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO's efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.
The PURO is designed to separate oil from condensate,
that is extracted from compressed air systems.
|
| ...FEATURES |
- For polyglycol applications consult factory
- No de-rating or over-sizing (no complicated sizing charts required) !
- Will handle and separate mineral oil, synthetic oil and stabile emulsions !
- Is applied on capacity of compressed air systems up to 8m 3 /min (300 cfm)
- Does not incorporate/require a condensate settling tank.
- TEST valve for sampling purposes.
- Simple to install
- Easy to maintain
- Rugged PE housing
- Small compact design
|
| ...PARTS# |
| 9509 |
PURO |
300 scfm |
| 9509-P |
PURO-Polyglycol-40HP Compressor |
| 95092 |
Puro Poly Bag (White Kit) |
| 95095 |
Polyglycol Bag for Puro |
| 95093 |
Charcoal Kit for Puro |
| |
|
| |
|
|
|
The PURO Grand is designed to separate oil from condensate, that is extracted from compressed air systems. The PURO Grand condensate separator covers compressor capacities up to 35m 3 /min (1250 cfm).
Polypropylene attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO's efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.
The PURO GRAND is designed to separate oil from condensate,
that is extracted from compressed air systems.
|
| ...FEATURES |
- No de-rating or over-sizing (no complicated sizing charts required) !
- Will handle and separate mineral oil, synthetic oil and stabile emulsions !
- Consult factory for polyglycol applications
- Is applied on capacity of compressed air systems up to 35m 3 /min (1250 cfm)
- Does not incorporate/require a condensate settling tank.
- TEST valve for sampling purposes.
- Simple to install
- Easy to maintain
- Rugged PE housing
- Small compact design
|
| ...PARTS# |
| 9510 |
Description |
1250 scfm |
| 9510-P |
PURO GRAND-Polyglycol-200HP Compressor |
| 95102 |
Puro Grand Poly Bag (White Kit) |
| 95105 |
Polyglycol Bag for Grand |
| 95103 |
Activated carbon replacement element |
| |
|
| |
|
|
|
|
 The PURO Grand Xtender is a modular add-on tower. Add the Xtender to the PURO Grand to achieve the desired capacity requirements.
The PURO Grand Xtender condensate separator covers a compressor capacity up to 70m 3 /min (2500 cfm) with a typical output oil residue value is less than 10 ppm.
The PURO Grand Xtender can be installed in an in-line configuration or in a corner set-up.
The PURO GRAND Xtender is designed to separate oil from condensate,
that is extracted from compressed air systems. |
| ...FEATURES |
- For polyglycol applications consult factory
- No de-rating or over-sizing (no complicated sizing charts required) !
- Will handle and separate mineral oil, synthetic oil and stabile emulsions !
- Is applied on capacity of compressed air systems up to 70m 3 /min (2500 cfm)
- Does not incorporate/require a condensate settling tank.
- TEST valve for sampling purposes.
- Simple to install
- Easy to maintain
- Rugged PE housing
- Small compact design
|
| ...PARTS# |
| 9511 |
Puro Xtender |
2500 scfm |
| 95113 |
Charcoal Kit for Xtender |
| |
|
| |
|
|
|
|
 The ENVIRO is designed to separate oil from condensate, which has been extracted from compressed air systems up to 1.8 m 3 /min (65 cfm).
Small or low cost compressed air systems require low cost separation solutions. The ENVIRO has been designed specifically for such economy applications.
The ENVIRO is designed to separate oil from condensate, that is extracted from compressed air systems.
|
| ...FEATURES |
- Designed for condensate containing mineral oil.
- Is applied on compressed air systems up to 65 cfm.
- TEST valve for sampling purposes.
- Simple to install
- Easy to maintain
- Rugged PE housing
- Small compact design
|
| ...PARTS# |
| 9501 |
Enviro 65 scfm |
| 95011 |
Charcoal Bag |
|
|
|
|
 |
|
|
